API General Cure will help treat fish lice, gill flukes, hole-in-the-head, skin flukes and velvet. According to the official directions, you will need to do a water change during treatment.
If you are doing a water change by adding tap water, you need to use a water conditioner. So, can you use General Cure with Seachem Prime?
You can find out in this guide at Aquarium Blueprints.
Can you use API General Cure with Seachem Prime?
As long as your dose the correct amount of both products in your fish tank, then there shouldn’t be any issues with using API General Cure and Seachem Prime at the same time.
How to use General Cure with Prime
In order to use these two products at the same time, we recommend that you take the following steps:
1. To begin, remove any activated carbon from your fish tank filtration.
2. You may also want to increase the aquarium temperature to 82°F (or 28°) if the fish in your tank is able to tolerate the warmer waters.
3. Next, you can start dosing API General Cure.
If you have the packet version of the product, then you need to use 1 packet for every 10 gallons (or 38 liters) of water.
If you have the bulk powder version, then you can add 5 mL for every 20 gallons (or 75 liters) of tank water.
4. To ease the stress of your already sick fish, you might also want to consider dosing API Aquarium Salt.
When it comes to adding salt, you should dose 5 mL for every 5 gallons (or 19 liters).
API Aquarium Salt should only be dose once when treating with API General Cure.
5. Furthermore, you might also want to consider also adding API Melafix as doing so will help ward off any secondary bacterial infection.
For Melafix, you need to dose this natural remedy at a rate of 5 mL for every 10 gallons (or 38 liters).
We recommend using Melafix daily over the course of the General Cure treatment.
6. Next, you simply need to wait for at least 48 hours.
7. After at least 48 hours have passed, you need to add another dose of API General Cure. The amount should be the same as the directions in Step #3.
8. You then need to wait for at least another 48 hours.
9. After 48 hours have gone by, you can then remove around 25% of tank water from your fish tank.
10. Next, you can dose Seachem Prime into your aquarium.
For the water conditioner, you need to add 5 mL for every 50 gallons or 200 liters of tank water.
11. Once you dose Prime, you should be able to refill your aquarium with tap water.
12. During the water change process, you may want to consider adding activated carbon to your filter as doing so will help remove General Cure and Melafix from your tank water.
13. To speed up the removal process of General Cure and Melafix, in addition to removing API Aquarium Salt, we recommend that you do daily water changes to slowly dilute the water.
