If you are looking for a simple hands-free fish tank heater, then you might have found the Uniclife Preset Submersible Aquarium Heater during your research. So, is this product worth buying or are you better off getting something else?
You can find out in this review at Aquarium Blueprints.
Comparison Chart
There are currently three available versions of the Uniclife Preset Submersible Aquarium Heater on Amazon.
The PS50 is designed for aquariums of up to 10 gallons (or 18 inches in length). The PS100 can handle heating fish tanks of up to 20 gallons (or 24 inches in length). The PS250 can heat tanks of up to 80 gallons (or 48 inches in length).
You can check out the current prices, as well as the dimensions, for each version with the following chart:
| PS50 | PS100 | PS250 | |
|---|---|---|---|
| Supported Tank Size | Up to 10 gallons (or 18 inches in length) | Up to 20 gallons (or 24 inches in length) | Up to 80 gallons (or 48 inches in length) |
| Dimensions: | 5.4 inches in height x 1 inches in diameter | 6 inches in height x 1 inches in diameter | 10.8 inches in height x 0.95 inches in diameter |
| Pricing | Check price on Amazon.(#CommissionsEarned) | Check price on Amazon.(#CommissionsEarned) | Check price on Amazon.(#CommissionsEarned) |
Features
The main feature of this heater is that has a preset temperature of around 78 degrees Fahrenheit (or 25.6 Celsius). The temperature could vary by 2 degrees Fahrenheit in either direction. So the range should end up being 76 degrees Fahrenheit (or 24.4 Celsius) to 80 degrees Fahrenheit (or 26.7 Celsius).
Using a electronic thermostat, the device will be able to automatically heat up the water once your fish tank gets too cold. The Red LED indicator will light up when the device is heating your fish tank. The light will turn off once the temperature gets warm enough.
The heater must be fully submerged underwater or you risk damaging it. Fortunately, the product comes with two suction cups so that you can easily secure it onto your glass or acrylic panel.
The Uniclife Preset Submersible Aquarium Heater is built with heat-resistant quartz glass, which is shatterproof. Thus, you shouldn’t have to worry about anything leaking out and potentially harming your fish.
The device is also UL Listed, meaning that there isn’t any risks when it comes to fire and electric shock.
Warranty
The purchase comes with a 1 year warranty in which Uniclife will replace the heater if you experience any quality issues. You can contact the company with the following email: [email protected].
Pros
What we loved most about the Uniclife Preset Submersible Aquarium Heater is its simplicity. You only have to plug it in and the device will take care of the rest.
The temperature range of 76 degrees Fahrenheit (or 24.4 Celsius) to 80 degrees Fahrenheit (or 26.7 Celsius) is good enough for a vast majority of common fish you find in the aquarium hobby, including the Cherry Barb, Corydora, Gourami, Guppy, Molly, Platy, Pleco, Neon Tetra, Swordtail and more.
Cons
The one issue we have is that you can’t adjust the temperature. So, unless you unplug the heater, the temperature will stay between 76 °F (or 24.4 °C) to 80 °F (or 26.7 °C).
You may need to lower the temperature in some instances such as trying to get your Corydoras to breed. You can also want to raise the temperature beyond 80 °F (or 26.7 °C) to treat an illness such as Ich.
How to set up the Uniclife Preset Submersible Aquarium Heater
You can take the following steps to adding this heater to your fish tank:
- Before putting the Uniclife Preset Heater in your fish tank, make sure to thoroughly rinse the product to get rid of any dust and other containments.
- After the rinse you can put the heater in your fish tank. You can position it vertically or horizontally. If you haven’t read our heater guide, we recommend the horizontal position as it will heat your aquarium more efficiently. We also suggest putting the heater close to the intake of your filter so that the heat will dissipate into the water column a lot faster tanks to the fast-moving current.
- Once you are done setting the Uniclife Preset Submersible Aquarium Heater into position, you can then plug the power plug into the power outlet.
- When doing water changes, it is best to unplug the heater beforehand or you risk causing damage. Keep in mind that you should leave this heater submerged at all times when it is plugged in.
Recap
Uniclife Preset Submersible Aquarium Heater is a pretty good product if simply want a hands-free way to keep your tank warm.
If you are interested, you can purchase the product with the following link: